APPLICATION
Analysis of the pump flow rate of the gear pump hot melt glue machine
Classification:
Release time:
2020-06-28 14:47
The gear pump hot melt glue machine discharges hot melt glue through the rotation of the gear pump. If there is insufficient pump flow, it will affect the spraying effect of the hot melt glue machine, thereby impacting product quality. Therefore, it is necessary to promptly address the issue of insufficient pump flow. The manufacturer of Jingtai hot melt glue machines has roughly analyzed the following reasons:
1. The return valve may be damaged.Counterclockwise rotation of the adjustment screw to reduce pressure, or clockwise rotation of the adjustment screw to increase pressure in the throat to detect whether there is a change in glue output:
2.It may be that the hot melt glue spraying machine has not been maintained regularly, and there are carbonized impurities in the melting glue tank, causing blockage in the entire glue delivery channel.;
3. Check whether the suction amount at the inlet of the gear pump is normal.4. There is a leakage phenomenon in the melting glue tank;;
5. Check whether the rotation speed of the gear pump is normal; if it is too low, the output will be small.
The gear pump is
an important component of hot melt glue machines.Jingtai gear pump hot melt glue machinesuse imported technology to manufacture gear pumps, effectively ensuring stability in output volume., with a long service life and low failure rate.，使用时间长久，故障率低。
Related Applications
Contact Information
Address: 157 Wanhong Road, Shuangyang Street, Luojiang District, Quanzhou City, Fujian Province
Mobile website